One of our finest and most rugged units!
Gets rid of moisture that causes air tool damage or clogging when blasting in an abrasive cabinet. Metal bowl and housing has automatic drain and sight glass so there's no guessing when to drain. Adjusting knob on drain sets performance for very high or low air flows. Has large 1/2" inlet and outlet and removes impurities down to 5 microns. Higher capacity (100 cfm) and 200 psi max pressure. Made in USA.
3-1/2'' diameter, 7'' high. 1/2" Pipe Threads. 3.16 lbs.
TECH TIP: Moisture removal is important while abrasive blasting or spray painting. Our water separators connect easily, and most have a replaceable filtering element which can be cleaned and reused.