We have the tools you need for a successful restoration.

POR-15® 6-Pack Gloss Black Rust Preventive Paint

POR-15
POR-15® 6-Pack Gloss Black Rust Preventive Paint
Item#
P-45006
MPN#
45006
UPC#
051491450065
 
(0 Rating)
Our Price: $57.00
In-Stock Ground Ship Only

Great for small projects.

Contains (6) 4 oz cans of POR-15® Gloss Black Rust Preventive Paint (most popular) so you can open small amounts as you need them, with NO WASTE! Each 4 oz can covers approximately 12 square feet. Use on frames, floor boards, under fenders, engine compartments, trunk areas, etc. Made in USA.

Stop rust permanently with POR-15®. Unlike "ordinary" paints, POR-15® is a rust preventive coating designed for application directly on rusted, seasoned or abrasive-blasted metal surfaces. POR-15® will stop rust permanently in its tracks and leave a beautiful, rock-hard, nonporous flexible finish that won't chip, crack, or peel.

The secret lies in the POR-15® curing process. POR-15® cures by drawing moisture from the atmosphere. Ordinary paint cures through the process of solvent evaporation through pores (that's why you can smell a paint job for weeks). These pores allow microscopic amounts of air and moisture to gradually reach the surface of the painted metal; and, if the paint goes unwaxed for very long, rust will form right back through it.

When using POR-15®, there are no pores in the drying process. Therefore, moisture and oxygen cannot reach the metal surface; and, it PREVENTS RUST FROM RECURRING by isolating the metal from further exposure to moisture. Without moisture present, steel can't rust. POR-15® is so tough that some customers describe it as "Powder Coat in a can".

Use it on: your chassis, fenders, floor boards, bumpers, trunk areas, engine areas, rocker panels, floor pans, firewalls, chassis components, wheel wells, truck beds, gas tank exteriors, springs, trailers, trucks, tractors, or anything that you want to permanently protect from rust, stone chips, or other common "paint" failures.

POR-15® Rust Preventive Paint is sensitive to UV light (sun) and must be topcoated with POR-15® Topcoats or other paints, including lacquer-based paints to prevent fading and discoloring. Topcoating is not required for areas not exposed to sunlight such as: inner fenders, floor boards, trunk areas, engine areas, rocker panels, undercoating of frames, etc. Always brush or spray on thin coats, minimum 2 coats. Lead-free.

CAUTION - Respiratory Protection is required when painting. Not included.

CAUTION - Once dry, POR-15® cannot be removed by solvent. To prevent skin from staining, wear protective clothing and avoid contact with skin. If product does contact skin, remove immediately.

Great for small projects.

Contains (6) 4 oz cans of POR-15® Gloss Black Rust Preventive Paint (most popular) so you can open small amounts as you need them, with NO WASTE! Each 4 oz can covers approximately 12 square feet. Use on frames, floor boards, under fenders, engine compartments, trunk areas, etc. Made in USA.

Stop rust permanently with POR-15®. Unlike "ordinary" paints, POR-15® is a rust preventive coating designed for application directly on rusted, seasoned or abrasive-blasted metal surfaces. POR-15® will stop rust permanently in its tracks and leave a beautiful, rock-hard, nonporous flexible finish that won't chip, crack, or peel.

The secret lies in the POR-15® curing process. POR-15® cures by drawing moisture from the atmosphere. Ordinary paint cures through the process of solvent evaporation through pores (that's why you can smell a paint job for weeks). These pores allow microscopic amounts of air and moisture to gradually reach the surface of the painted metal; and, if the paint goes unwaxed for very long, rust will form right back through it.

When using POR-15®, there are no pores in the drying process. Therefore, moisture and oxygen cannot reach the metal surface; and, it PREVENTS RUST FROM RECURRING by isolating the metal from further exposure to moisture. Without moisture present, steel can't rust. POR-15® is so tough that some customers describe it as "Powder Coat in a can".

Use it on: your chassis, fenders, floor boards, bumpers, trunk areas, engine areas, rocker panels, floor pans, firewalls, chassis components, wheel wells, truck beds, gas tank exteriors, springs, trailers, trucks, tractors, or anything that you want to permanently protect from rust, stone chips, or other common "paint" failures.

POR-15® Rust Preventive Paint is sensitive to UV light (sun) and must be topcoated with POR-15® Topcoats or other paints, including lacquer-based paints to prevent fading and discoloring. Topcoating is not required for areas not exposed to sunlight such as: inner fenders, floor boards, trunk areas, engine areas, rocker panels, undercoating of frames, etc. Always brush or spray on thin coats, minimum 2 coats. Lead-free.

CAUTION - Respiratory Protection is required when painting. Not included.

CAUTION - Once dry, POR-15® cannot be removed by solvent. To prevent skin from staining, wear protective clothing and avoid contact with skin. If product does contact skin, remove immediately.

Our Technicians Suggest
POR-15® Metal Prep, Qt
Item#
P-MRQ
MPN#
40204
UPC#
051491402040
 
(0 Rating)
Our Price: $18.00
In-Stock Ground Ship Only
POR-15® Reducing Solvent, Quart
Item#
P-SVQX
MPN#
POR-SVQ
UPC#
051491404044
 
(0 Rating)
Our Price: $16.00
In-Stock Ground Ship Only
Paint Brush, 1-1/2" wide
Item#
9005-00
MPN#
9005-00
UPC#
796512000156
 
(0 Rating)
Our Price: $0.99
In-Stock
Gerson® Signature ProSeries Paint/Body Combo Respirator, Med
Item#
7151-95
MPN#
9251
UPC#
044585892513
 
(4 Ratings)
Our Price: $36.95
Backorder
SAS® DERMA-LITE™ Disposable Nitrile Work Gloves, Lrg
Item#
ME-16608
MPN#
6608
UPC#
781311066083
 
(0 Rating)
Our Price: $19.95
Backorder
Reviews for Item # P-45006
Be the first to review this product. Write a Review
topTop