A high-viscosity direct-to-metal seam sealer designed for sealing horizontal and vertical voids, joints, and seams.
Duplicates beads typically seen on skins, hoods, and trunks. Product is paintable immediately with solvent-based coatings and applies to bare metal, primed metal, aluminum, SMC, FRP, and fiberglass. 10-15 minute working time, 30-45 minute handling time, sandable in 45 minutes. Full cure time is 6-8 hours. 1:1 mix ratio. Made in USA.
Gray. 7 oz cartridge with two Static Mixer Tips.
Requires Dual-Cartridge Applicator Gun (#PF-26124 - sold separately, see below).