We have the tools you need for a successful restoration.

Kirker Enduro Prime Epoxy Primer (2K) DTM - Gray, Qt

Kirker
Kirker Enduro Prime Epoxy Primer (2K) DTM - Gray, Qt
Item#
KP-EP611QT
MPN#
EP-611QT
UPC#
674132003590
 
(2 Ratings)
Our Price: $27.00
In-Stock Ground Ship Only

Offers excellent adhesion and corrosion protection.

Apply directly over properly prepared steel, aluminum, factory finishes, and fiberglass. Great foundation for complete or partial refinish work. Unlike most epoxies, sands easy after 2-3 days. Can be top coated with color, or for best results, coat with 2K urethane primer. Lead, chromate, and isocyanate free. Made in USA.

1:1 mix ratio (1 part primer to 1 part required Kirker Epoxy Catalyst - sold separately, see below). Thin with urethane reducer below. Spray with 1.4 to 1.8mm.

Quart. Gray.

CAUTION - Respiratory Protection is required when painting. Not included.

Offers excellent adhesion and corrosion protection.

Apply directly over properly prepared steel, aluminum, factory finishes, and fiberglass. Great foundation for complete or partial refinish work. Unlike most epoxies, sands easy after 2-3 days. Can be top coated with color, or for best results, coat with 2K urethane primer. Lead, chromate, and isocyanate free. Made in USA.

1:1 mix ratio (1 part primer to 1 part required Kirker Epoxy Catalyst - sold separately, see below). Thin with urethane reducer below. Spray with 1.4 to 1.8mm.

Quart. Gray.

CAUTION - Respiratory Protection is required when painting. Not included.

Our Technicians Suggest
Kirker Enduro Prime Epoxy Primer Catalyst (2K) DTM - Quart
Item#
KP-EPC611
MPN#
EPC611QT
UPC#
674132003613
 
(0 Rating)
Our Price: $19.00
In-Stock Ground Ship Only
Kirker ULTRA-GLO Urethane Reducer - Medium, Quart
Item#
KP-UR8075
MPN#
UR-8075
UPC#
674132002005
 
(2 Ratings)
Sale $11.95
Reg. $12.95
Save 8%
In-Stock Ground Ship Only
Gerson® Signature ProSeries Paint/Body Combo Respirator, Med
Item#
7151-95
MPN#
9251
UPC#
044585892513
 
(4 Ratings)
Sale $33.95
Reg. $36.95
Save 8%
Backorder
You may also like:
Reviews for Item # KP-EP611QT
Reviewed by 2 Customers
Displaying Reviews 1-2 of 2

 

Great Product, easy to use

By Car Nut from Northern Virginia on 8/1/2017
Bottom Line: Yes, I would recommend this to a friend

Switched to Enduro Prime because mixing and application instructions are straight forward. 1:1 mix, No induction times....easy to use! Media blasted surfaces,ight sand with 60/80 grit, clean/degrease and apply primer. Great foundation primer for refinish project. Unlike other reviews, product cured fine and sands easily after a couple days. For reference, painting was done in warmer months of year temp ranges between low of 65 and high of 90 deg F.

Was this review helpful to you? Yes / No - You may also flag this review.

 

unable to sand

By Jeff Verified Buyer from Ohio on 2/29/2016
Was this a gift? No
Bottom Line: No, I would not recommend this to a friend

Can states that it can be sanded after 3 days.After 7 days, it just filled the sandpaper with little balls of primer. I called the tech line he kept saying that it was because it was cold, but my garage NEVER goes below 65*.I ended up using 40 grit to remove (and it loaded up the paper) and bought more of the epoxy primer that I had used previously and was able to sand 2 days later with 320. I guess this would have worked if it didn't need to be sanded. I used it on the inside of the door and just painted over it per the instructions and it looks good, but I needed to do some minor body work on the outside of the door which required sanding.

Service & Delivery comments: Excellent and fast delivery
TP Tools response: This is one of our most popular primers. If the Catalyst was not added to the primer or not the proper ratio of catalyst added, the product will stay soft. TP Tools
Was this review helpful to you? Yes / No - You may also flag this review.

Displaying Reviews 1-2 of 2
topTop