Professional painters use this set up!
Will remove all traces of moisture as well as oils which is so important when abrasive blasting or spray painting. Kit includes valves, coalescing filter with spare element, regulator, and all necessary pipe fittings. The moisture is removed as it soaks into element in the coalescing filter. Remove original element to dry and replace with a dry element.
Includes: 3405-60 Coalescing Filter, extra element, 2 brass 1/2" valves for inlet and drain, 12 nipples, 2 tees, 5 elbows, 3409 regulator, 3407 gauge, 1/2" union, 3 bushings, and mounting bracket. Units made in USA.
TP Tools Tip: Even if you don't use metal piping, you can still use these kits in your shop. By running your air hose into the top inlet portion of piping kit, the 'U' piping will aid in moisture removal, along with the water separator. For more information, see Metal Piping Diagram link in the Tips/Technical section.