|
|
1/3 HP Baldor Buffer and Packages
|
$219.00 - $459.00
TP Tools offers buffers in three affordable ways:
- 1/3 HP bench mount Baldor buffer.
- Baldor buffer and 11 gauge steel stand or cast iron Baldor.
- Baldor buffer, stand and buffing kit. Each is described below.
Baldor buffers are known for high quality and dependability - they are built for heavy workloads. 1/3 HP buffer brings tarnished brass, chrome, silver, etc. back to the original finish. Removes scratches from plastics, aluminum and other metals. 3600 rpm motor with 8 ft cord (115 volt/3.1 amps) plugs into 115 volt common house-hold circuit. Uses 6'' diameter buffing wheels x 1/2'' arbor hole. Has 18'' shaft length (3'' from end of shaft to housing). 3 year warranty against burnout. Made in USA.
Mount buffer to 11 gauge steel stand for a sturdy stand-alone unit. Heavy-duty steel stand is 30-1/2" high with 18'' wide x 15-3/4'' base. Also available with Baldor cast iron stand: 33'' high with 15-3/4'' wide X 14'' deep base. Made in USA.
Buffing kit completes the finishing operation with everything you need: six different buffing compounds, buffing rake to keep buffing wheels clean, and six 1/2'' thick buffing wheels (2 sisal for fastest cutting, 2 spiral for removal of most scratches and 2 loose for final high gloss finishing). Kit is designed to fit 1/3 HP motor, 1/2'' shaft. Made in USA.
Face, eye and respiratory protection required when bufifng.
|
|
|
|
|
|
|
|
|
|
Heavy, oversize, motor freight, or other items requiring extra shipping/packaging have a "Zone Adder".
|
 |
Adders for Zone 1, 2, and 3 (if any) are shown above.
See
Shipping/Export for more information and to
determine your delivery zone.
(Direct lines only - no interlines)
This amount will be added to your total automatically.
|
|