|
|
36'' Sheet Metal Brake
|
$359.00 - $419.00
TP Tools offers this sheet metal brake alone or with convenient stand. You SAVE when you buy both!
You can make any of the bends, as well as other custom shapes up to 36" wide and to 18 gauge thick. Rugged,
hardworking, made-in-USA brake can be adjusted for metal thickness. Has 14" handles with grips, cross support on stand for extra leverage. Brake is fully assembled - except bolt-together leg stand. There is no other way to bend metal correctly. Made in USA.
Free, with purchase of brake, are 4 metal patch panels (each 10-3/4" x 22-1/2"); and, if you purchase the brake and stand, a larger patch panel (10-3/4" x 36") is also Free! Metal patch panels have electro-zinc finish, for better primer/paint adhesion and rust prevention.
|
|
|
|
|
|
|
|
Heavy, oversize, motor freight, or other items requiring extra shipping/packaging have a "Zone Adder".
|
 |
Adders for Zone 1, 2, and 3 (if any) are shown above.
See
Shipping/Export for more information and to
determine your delivery zone.
(Direct lines only - no interlines)
This amount will be added to your total automatically.
|
|