|
|
POR-15® Rust Preventive Paint
|
|
|
$31.00 - $149.00
Stop rust permanently with POR-15®. Unlike "ordinary" paints, POR-15® is a rust-preventive coating designed for application directly on rusted, seasoned or abrasive-blasted metal surfaces. POR-15® will stop rust permanently in its tracks and leave a beautiful, rock-hard, nonporous flexible finish that won't chip, crack, or peel. Made in USA.
The secret lies in the POR-15® curing process. POR-15® cures by drawing moisture from the atmosphere. Ordinary paint cures through the process of solvent evaporation through pores (that's why you can smell a paint job for weeks). These pores allow microscopic amounts of air and moisture to gradually reach the surface of the painted metal; and, if the paint goes unwaxed for very long, rust will form right back through it.
When using POR-15®, there are no pores in the drying process. Therefore, moisture and oxygen cannot reach the metal surface; and, it PREVENTS RUST FROM RECURRING by isolating the metal from further exposure to moisture. Without moisture present, steel can't rust. POR-15® is so tough that some customers describe it as "Powder Coat in a can".
Use it on your chassis, fenders, floor boards, bumpers, trunk areas, engine areas, rocker panels, floor pans, firewalls, chassis components, wheel wells, truck beds, gas tank exteriors, springs, trailers, trucks, tractors, or anything that you want to permanently protect from rust, stone chips, or other common "paint" failures.
POR-15® Rust Preventive Paint is sensitive to UV light (sun) and must be topcoated with POR-15® Chassis Coat Black™, BlackCote™, Stirling Silver™, or other paints, including lacquer-based paints to prevent fading and discoloring. When topcoating with other off-the-shelf paints, POR-15® Tie-Coat Primer™ must be applied on top of POR-15® Rust Preventive Paints to guarantee proper paint adhesion. Topcoating is not required for areas not exposed to sunlight such as: inner fenders, floor boards, trunk areas, engine areas, rocker panels, undercoating of frames, etc. Always brush or spray on thin coats, minimum 2 coats. One quart covers 96 square feet. One pint covers 48 square feet. Lead-free.
P-1PB, P-1QB or P-1GB Gloss Black - Most Popular - Used on frames, floor boards, under fenders, engine compartments, trunk areas, etc. Pint, quart, or gallon.
P-1PSB, P-1QSB or P-1GSB Semi-Gloss Black - Perfect for areas which demand factory original semi-gloss black such as: frames, chassis, firewalls, inner fenders, suspension and underbodies. Pint, quart, or gallon.
P-1QS Gloss Silver - Contains metal filler and should be used on badly rusted, pitted areas to fill small holes and add strength to the metal. It will fill in small pits or holes better than black. Quart.
P-1QG or P-1GG Gloss Gray - Used on frames, floorboards, under fenders, engine compartments, trunk areas, suspension, etc. Quart or gallon.
P-1QC Satin Gloss Clear - Great for under-the-hood detailing on bolts, hood hinges, brackets, etc. Quart.
CAUTION - Respiratory Protection is required when painting. Not included. CAUTION - Once dry, POR-15® cannot be removed by solvent. To prevent skin from staining, wear protective clothing and avoid contact with skin. If product does contact skin, remove immediately. *Orders of 3 Gallons/more require extra shipping - call.
|
|
|
|
|
|
|
|
Heavy, oversize, motor freight, or other items requiring extra shipping/packaging have a "Zone Adder".
|
 |
Adders for Zone 1, 2, and 3 (if any) are shown above.
See
Shipping/Export for more information and to
determine your delivery zone.
(Direct lines only - no interlines)
This amount will be added to your total automatically.
|
|