|
|
Martin Auto Body Tools
|
|
|
$23.00 - $50.00
All Martin Tools this page are Made in USA.
MT-1058S Shrinking Toe Dolly - One of our most popular! Shaped like a toe dolly but has one face with raised serrations for shrinking metal stretched by dents. 4-5/8" x 2-1/4" x 1". 3.4 lbs.
MT-1060 Rail Dolly - General-purpose dolly for bumping, dinging, and straightening. Has several different crowned surfaces and 2 beading and flanging lips. 2-7/8" x 2-5/8" x 2-1/4". 3 lbs.
MT-1058 Toe Dolly - Long, thin toe dolly provides easy accessibility to narrow pockets. Large flat surface is often used in shrinking and dinging flat panels. 4-3/4" x 2-3/8" x 1-1/8". 3.1 lbs.
MT-1067 Wedge Dolly - A favorite with many body men! Long and slender, so works in tight areas, yet is heavy enough for dinging and flattening. 5-3/4" x 2-3/8" x 2-3/16". 4 lbs.
MT-1064 Egg-Shaped Dolly - Unique-shaped dolly has high-crown design - perfect for curves on fenders. Also has 2 flat surfaces for beading and flanging. 3-3/4" x 2-5/8" x 1-5/8". 3.1 lbs.
MT-1052 Spoon Dolly - Long handle gets tool in tight places. Drive between body reinforcements and outer panels, then pry outward while metal is dinged or smoothed. Face 2-1/2" x 1" x 3". Handle 11" long. 4.2 lbs.
MT-1044 Heavy-Duty Double-End S-Spoon - General-purpose fender and frame spoon designed for further reach behind panels and body reinforcements. Also great for prying. Face 1-3/8" x 2-1/4". Overall 12-3/16" long. 2.1 lbs.
MT-1050 Combination Spoon - General-purpose fender spoon. Ideal behind panels or fenders, also as a dolly behind brackets. Offset handle for balance when dinging. Face 1-3/4" x 5-1/2". Handle 1" octagon x 4-3/4". 3 lbs.
MT-1059 Heel Dolly - Dolly's small design makes it ideal for reaching into sharp corners or tight spaces. Great for bumping, dinging, and straightening panels. 3-1/4" x 2-1/2" x 1-7/16". 2.7 lbs.
MT-1024 Surfacing Spoon - Fender spoon for spring hammering, skipping, and surface metal finishing. Curve gets behind panels and between inner construction. Polished face. Face 9" x 2-1/8". Overall 15-1/8" long. 2.5 lbs.
MT-1036 Light Dinging Spoon - For removing small dings. Hold spoon against metal and strike with hammer. 2" x 4" face spreads blow over large area for a smooth finish. Overall 10" long. 8 oz.
|
|
|
|
|
|
|
|
Heavy, oversize, motor freight, or other items requiring extra shipping/packaging have a "Zone Adder".
|
 |
Adders for Zone 1, 2, and 3 (if any) are shown above.
See
Shipping/Export for more information and to
determine your delivery zone.
(Direct lines only - no interlines)
This amount will be added to your total automatically.
|
|