|
|
Martin Dollies and Spoons
|
|
|
$30.00 - $58.00
All Martin Tools this page are made in USA!
MT-1057 Lightweight Toe Dolly - Thin, lightweight. Gets in between panels. Large flat surface often used for shrinking and dinging flat panels. 4-3/4" x 2-1/4" x 11/16". 1.8 lbs.
MT-1061 Utility Dolly - High-crown dolly with one narrow beading edge. Thick rounded sides are useful in short curves. Can be used in many applications including high-crown portions of hoods, fenders, and body panels. 3-1/8" x 3" x 1-5/8". 2.9 lbs.
MT-1065 Lightweight Wedge Dolly - Short, slender general-purpose dolly for dinging and flattening. Also used for beads or flanges on fenders. Thin edge is useful for corners; flat side used under long curves of fenders. 2-1/8" x 2-1/2" x 4-7/16". 2.7 lbs.
MT-1054 Long Curved Spoon - Very popular. Curved blade for prying up dents behind curved reinforcements in header panels, doors, body pillars, reinforcements in hoods, and radiator shell. Face - 2" x 7", overall - 10-1/2" long. 1.5 lbs.
MT-1091 Fender Bending Tool - Very useful for bending flanged edges on fenders. Also handy for alignment of inner construction and flanges on hoods. Has 2 rounded and smoothed surfaces for forming and shaping. 14-1/8" long. 3.2 lbs.
|
|
|
|
|
|
|
|
Heavy, oversize, motor freight, or other items requiring extra shipping/packaging have a "Zone Adder".
|
 |
Adders for Zone 1, 2, and 3 (if any) are shown above.
See
Shipping/Export for more information and to
determine your delivery zone.
(Direct lines only - no interlines)
This amount will be added to your total automatically.
|
|