We have the tools you need for a successful restoration.

Super-Pro Abrasive Shaker & Variable Speed Control Kit

Skat Blast
Super-Pro Abrasive Shaker & Variable Speed Control Kit
Item#
6120-08
MPN#
6120-08
UPC#
728044211939
 
(5 Ratings)
Our Price: $109.00
In-Stock

BEST BUY - SAVE!

Includes NEW Super-Pro Abrasive Shaker and Super-Pro Abrasive Shaker Variable Speed Control.

#6120-11 Super-Pro Abrasive Shaker - New design with twice the vibration - keeps abrasive flowing to the pickup tube on cabinets 4 ft and over. Under high-humidity conditions or excess moisture, abrasive flow to the pickup tube can slow down, causing surging, sputtering, and little abrasive to the pickup tube and gun. To ensure a fast uniform flow of abrasive, install the Super-Pro Abrasive Shaker. Unique vibrating motor continually shakes abrasive down to the pickup tube assembly. Works great on wide funnels (4 ft & wider) where abrasive may hang up on sides. Complete with 8 ft cord, mounting bracket, hardware, and instructions. 115 volt. Mounts to side of funnel.

#6120-09 Super-Pro Abrasive Shaker Variable Speed Control - Adjusts Abrasive Shaker vibration by simply turning a dial. Easy to use - just plug Variable Speed Control into a 115 volt outlet and plug Abrasive Shaker into receptacle on bottom of Variable Speed Control. Instantly, you can control the vibration level of your Abrasive Shaker depending on humidity levels or width of your funnel.

BEST BUY - SAVE!

Includes NEW Super-Pro Abrasive Shaker and Super-Pro Abrasive Shaker Variable Speed Control.

#6120-11 Super-Pro Abrasive Shaker - New design with twice the vibration - keeps abrasive flowing to the pickup tube on cabinets 4 ft and over. Under high-humidity conditions or excess moisture, abrasive flow to the pickup tube can slow down, causing surging, sputtering, and little abrasive to the pickup tube and gun. To ensure a fast uniform flow of abrasive, install the Super-Pro Abrasive Shaker. Unique vibrating motor continually shakes abrasive down to the pickup tube assembly. Works great on wide funnels (4 ft & wider) where abrasive may hang up on sides. Complete with 8 ft cord, mounting bracket, hardware, and instructions. 115 volt. Mounts to side of funnel.

#6120-09 Super-Pro Abrasive Shaker Variable Speed Control - Adjusts Abrasive Shaker vibration by simply turning a dial.Easy to use - just plug Variable Speed Control into a 115 volt outlet and plug Abrasive Shaker into receptacle on bottom of Variable Speed Control. Instantly, you can control the vibration level of your Abrasive Shaker depending on humidity levels or width of your funnel.

Reviews for Item # 6120-08
Reviewed by 5 Customers
Displaying Reviews 1-5 of 5

 

Exactly what I needed. Works great

By DYI Verified Buyer from Nebraska on 12/22/2019
Was this a gift? No
Bottom Line: Yes, I would recommend this to a friend

If you have a big cabinet or probably any cabinet this thing is perfect. Don't need to put it on high. Low works great. Helps keep the abrasive down by the pickup tube so you can keep on blasting.

Was this review helpful to you? Yes / No - You may also flag this review.

 

I would definitely recommend this product!

By Ed Verified Buyer from Texas on 11/19/2019
Was this a gift? No
Pros: Easy installation; greatly improved performance.
Bottom Line: Yes, I would recommend this to a friend

The shaker unit was very easy to install. I was able to use the bolts with washers and nuts without removing the metal mesh work surface. Just remove the round sheet metal guard that surrounds the abrasive supply hose and there is room to reach through and place the washers and lock nuts in place. The entire installation took less than 20 minutes. The variable speed control kit is a "must have". The "lower" setting provided just the right amount of vibration and greatly increased the cycling of abrasive through my unit. It was like adding a new load of fresh abrasive media.

Service & Delivery comments: Delivery was very prompt and well packaged.
Was this review helpful to you? Yes / No - You may also flag this review.

 

I would definitely by this product again.

By None Verified Buyer from Little Colorado on 11/11/2019
Was this a gift? No
Pros: This product worked very well on my machine.
Bottom Line: Yes, I would recommend this to a friend

My blaster is a bench top model and the angle of the sheet metal in the hopper is less then a floor model machine. I used to frequently stop blasting and remove a hand from the glove and beat the bottom of the hopper to get the media to slide down. This product works extremely well in keeping the media moving to the bottom of the hopper. The variable speed control is great also because I found that the vibrator did not have to run at full speed to keep the media moving to the bottom of the hopper. Both products are great and I would recommend they should both be used.

Service & Delivery comments: Very prompt. I got it a day before I expected it to arrive.
Was this review helpful to you? Yes / No - You may also flag this review.

 

Sand vibrator

By Chloe's Creations Verified Buyer from Tarlton Ohio on 7/30/2019
Was this a gift? No
Pros: Works good
Describe Yourself: Artist
Cons: Only does one side of the box
Best Uses: Vibrates the sand
Bottom Line: Yes, I would recommend this to a friend

You need two of them

Was this review helpful to you? Yes / No - You may also flag this review.

 

Best buy since the blaster!

By 63 Galaxie Verified Buyer from Franklin, TN on 10/17/2018
Was this a gift? No
Bottom Line: Yes, I would recommend this to a friend

This vibrator makes my blasting cabinet 100% more efficient. I have a low slope hopper and this vibrator makes sure I am always blasting with media and not just air!!!

Service & Delivery comments: Extremely prompt delivery.
Was this review helpful to you? Yes / No - You may also flag this review.

Displaying Reviews 1-5 of 5
topTop