A controlled flow seam sealer designed for horizontal seams requiring a flowable-type seam sealer.
Duplicates factory seams on drip rails, roof seams, trunks, and quarter panel to rear deck seams. Product is paintable and easily duplicates OEM sealer appearance. Adheres to primed steel, primed aluminum, cured 2K paint, 2K epoxy primer, and 2K urethane primer. Made in USA.
20-30 minute work time, 30-45 minute handling time, paintable in 60 minutes, sandable in 60 minutes, full cure time is 6-8 hours. 1:1 mix ratio.
Gray. 7 oz cartridge with two Static Mixer Tips.
Requires Dual-Cartridge Applicator Gun (#PF-26124 - sold separately, see below).