We have the tools you need for a successful restoration.

Direct Mount Vacuum Abrasive Reclaimer

Skat Blast
Direct Mount Vacuum Abrasive Reclaimer
Item#
6120-40
MPN#
6120-40
UPC#
728044191286
 
(0 Rating)
Our Price: $99.00
In-Stock

For use with any Skat Blast Vacuum System. Collects 30-40% of reusable abrasive, and extends vac bag/filter and motor life!

Skat Blast Vacuum Abrasive Reclaimer mounts in-line between your abrasive blast cabinet and vacuum. During use, reclaimer instantly starts collecting and separating sharp, reusable abrasive. Broken-down, powderized abrasive travels through reclaimer and into vacuum where it is collected and can later be disposed of. Sharp, reclaimed abrasive stays in reclaimer and can be drained into a bucket and poured back into your cabinet for reuse. Results are a 30-40% abrasive savings, longer vacuum life, less emptying of vacuum, and extended bag/filter and motor life. Try one on your cabinet today and see how quickly it pays for itself!

9-1/2"w, 8"d, 22"h. Made in USA.

Fits model 780, 780-TL, 800-T, SC-33, SC-33V (requires closing latch on 780-TL, 800-T, SC-33 & SC-33V lid to be relocated), SC-35V, SC-45V, SC-28, SC-28V, 850, 850-T, SC-34, SC-40, 940-DLX, 930, 935, 950, 951, 952, SC-46, 960, 960-DLX, 960-T, 960-SE & 970 cabinets. To install, remove existing vacuum ferrule and fasten reclaimer to side of cabinet (mounting hardware included). Then connect Vac-50, 45, 40, 36, 35, or 34 inlet hose.

A must when using expensive abrasives such as Aluminum Oxide and Silicon Carbide!

For use with any Skat Blast Vacuum System. Collects 30-40% of reusable abrasive, and extends vac bag/filter and motor life!

Skat Blast Vacuum Abrasive Reclaimer mounts in-line between your abrasive blast cabinet and vacuum. During use, reclaimer instantly starts collecting and separating sharp, reusable abrasive. Broken-down, powderized abrasive travels through reclaimer and into vacuum where it is collected and can later be disposed of. Sharp, reclaimed abrasive stays in reclaimer and can be drained into a bucket and poured back into your cabinet for reuse. Results are a 30-40% abrasive savings, longer vacuum life, less emptying of vacuum, and extended bag/filter and motor life. Try one on your cabinet today and see how quickly it pays for itself!

9-1/2"w, 8"d, 22"h. Made in USA.

Fits model 780, 780-TL, 800-T, SC-33, SC-33V (requires closing latch on 780-TL, 800-T, SC-33 & SC-33V lid to be relocated), SC-35V, SC-45V, SC-28, SC-28V, 850, 850-T, SC-34, SC-40, 940-DLX, 930, 935, 950, 951, 952, SC-46, 960, 960-DLX, 960-T, 960-SE & 970 cabinets. To install, remove existing vacuum ferrule and fasten reclaimer to side of cabinet (mounting hardware included). Then connect Vac-50, 45, 40, 36, 35, or 34 inlet hose.

A must when using expensive abrasives such as Aluminum Oxide and Silicon Carbide!

Reviews for Item # 6120-40
Be the first to review this product. Write a Review
topTop