We have the tools you need for a successful restoration.

USA 180-DC INSIDER II HEPA Dust Collector

Skat Blast
USA 180-DC INSIDER II HEPA Dust Collector
  • USA 180-DC INSIDER II HEPA Dust Collector
  • USA 180-DC INSIDER II HEPA Dust Collector
Item#
180-DC
MPN#
180-DC
UPC#
728044190005
 
(10 Ratings)
Our Price: $1,199.00
Zone Map
Zone 1 Zone 2 Zone 3
$110.00 $155.00 $220.00
In-Stock Ground Ship Only

Commercial-Grade Made-in-USA Dust Collector increases visibility while abrasive blasting - pulls 300-350 CFM!

180-DC INSIDER II - Removes dust for all-day cabinet blasting! Recommended for improved visibility within Skat Blast Cabinets up to 5 ft wide. (Smaller cabinets work best with Vac-50 Vacuum System.) Skat Blast Dust Collector with patented HEPA Filtration traps ultra-fine dust particles down to 0.3 microns and keeps 99.97% dust inside the dust collector and out of your shop. Non-stick HEPA Filter Membrane resists clogging. Most dust simply falls off the filters.

Model 180-DC has Triple Bank HEPA Filtration. The result is 40% more airflow through the cabinet and dust collector, and increased visibility and dust collection over older bag-style units. Plus, 125% larger filtering area!

Here's how it works: dust-laden air enters back of the dust collector through a 5" diameter, 6 ft long hose (included) and settles on the outside of the HEPA Filter Cartridges. Cartridges are easily accessible through the front door. Shaker lever assembly, located on the rear of the unit, operates manually to shake dust and dirt off the filter cartridges. Dust falls down to the bottom drawer. To empty, simply open and remove drawer and discard residue. Fast and easy!

Large 10"w x 28"h hinged front door makes filter cartridge changes and inspection fast and easy. 1/3 HP, 3450 RPM, 115 volt Baldor motor and 8-3/4" diameter blower wheel pull 300-350 cfm. Includes (3) 8"H x 7-1/4" dia HEPA Filter Cartridges, manual shaker assembly, clean-out drawer (10-1/2"w, 12-1/2"d, 4"h with gasket), 6' long x 5" dia hose, and 4" rear outlet. Made in USA.

Greatly improves visibility over Vac-50 due to larger filtering area and 5" diameter hose. Recommended for cabinets up to 5 feet wide. May be special-ordered in place of Vac-50 at extra cost.

16"W, 15"D, 56"H. Ship wt 159 lbs motor freight. Unload or Liftgate Service is available for this equipment (extra cost, in addition to freight adder). Click on Unload or Liftgate Service in suggestions below for details.

WARNING: Do not use Dust Collector System as a wet vac. Electrical shock and serious injury could result. Dust Collector filters are guaranteed for 90 days against mfg defects. Dust Collector motors are guaranteed for 1 year. Collectors are not for collecting wood shavings or sawdust.

Commercial-Grade Made-in-USA Dust Collector increases visibility while abrasive blasting - pulls 300-350 CFM!

180-DC INSIDER II - Removes dust for all-day cabinet blasting! Recommended for improved visibility within Skat Blast Cabinets up to 5 ft wide. (Smaller cabinets work best with Vac-50 Vacuum System.) Skat Blast Dust Collector with patented HEPA Filtration traps ultra-fine dust particles down to 0.3 microns and keeps 99.97% dust inside the dust collector and out of your shop. Non-stick HEPA Filter Membrane resists clogging. Most dust simply falls off the filters.

Model 180-DC has Triple Bank HEPA Filtration. The result is 40% more airflow through the cabinet and dust collector, and increased visibility and dust collection over older bag-style units. Plus, 125% larger filtering area!

Here's how it works: dust-laden air enters back of the dust collector through a 5" diameter, 6 ft long hose (included) and settles on the outside of the HEPA Filter Cartridges. Cartridges are easily accessible through the front door. Shaker lever assembly, located on the rear of the unit, operates manually to shake dust and dirt off the filter cartridges. Dust falls down to the bottom drawer. To empty, simply open and remove drawer and discard residue. Fast and easy!

Large 10"w x 28"h hinged front door makes filter cartridge changes and inspection fast and easy. 1/3 HP, 3450 RPM, 115 volt Baldor motor and 8-3/4" diameter blower wheel pull 300-350 cfm. Includes (3) 8"H x 7-1/4" dia HEPA Filter Cartridges, manual shaker assembly, clean-out drawer (10-1/2"w, 12-1/2"d, 4"h with gasket), 6' long x 5" dia hose, and 4" rear outlet. Made in USA.

Greatly improves visibility over Vac-50 due to larger filtering area and 5" diameter hose. Recommended for cabinets up to 5 feet wide. May be special-ordered in place of Vac-50 at extra cost.

16"W, 15"D, 56"H. Ship wt 159 lbs motor freight. Unload or Liftgate Service is available for this equipment (extra cost, in addition to freight adder). Click on Unload or Liftgate Service in suggestions below for details.

WARNING: Do not use Dust Collector System as a wet vac. Electrical shock and serious injury could result. Dust Collector filters are guaranteed for 90 days against mfg defects. Dust Collector motors are guaranteed for 1 year. Collectors are not for collecting wood shavings or sawdust.

Our Technicians Suggest
HEPA Filter Cartridge (USA) for 180-DC & 310-DC. Also fits Vac-50, 45 & 40.
Item#
6011-HEPA
MPN#
6011-HEPA
UPC#
728044190487
 
(2 Ratings)
Our Price: $49.95
  • Buy 3 at $46.95 ea
In-Stock
Dust Collector Final Filter Kit
Item#
6020-10
MPN#
6020-10
UPC#
728044190593
 
(0 Rating)
Our Price: $59.00
In-Stock
Dust Collector Exhaust Kit
Item#
6017-08
MPN#
6017-08
UPC#
728044190579
 
(0 Rating)
Our Price: $49.00
In-Stock
Replacement Filter Cartridge Gasket
Item#
6014-13
MPN#
6014-13
UPC#
728044190524
 
(0 Rating)
Our Price: $5.95
In-Stock
Unload or Liftgate Service - Truck Motor Freight
Item#
LG50
MPN#
LG50
UPC#
728044204245
 
(12 Ratings)
Our Price: $50.00
In-Stock Ground Ship Only
Reviews for Item # 180-DC
Reviewed by 10 Customers
Displaying Reviews 1-5 of 10

 

Great item

By Greg Verified Buyer from Florida on 10/28/2019
Was this a gift? No
Bottom Line: Yes, I would recommend this to a friend

Easy set up

Was this review helpful to you? Yes / No - You may also flag this review.

 

Price too high, technology simple and old.......

By NunYa Verified Buyer from Ohio on 9/26/2019
Was this a gift? No
Pros: Noise is much less than the standard vacuum., Simple design, easily copied, due to high cost., Suction is 10X more than standard vacuum.
Describe Yourself: Master Technician working in Science and Tech.
Cons: Company value profit margin too much on vacuum, Poor people have to copy this design to afford, Price! No new invention, why charge so much?
Best Uses: Cleaning process equipment
Bottom Line: No, I would not recommend this to a friend

This design should be cheaper and standard with all Blasting Cabinets. I would buy one for home use, but can't afford the best vacuum option. Thus, I am forced to reverse engineer your best vacuum, cutting you out of any profit...... Stop listening to Marketing fools and engineer this design with a more affordable price point.

Service & Delivery comments: Best delivery ever, very professional.
TP Tools response: The Made in USA, 180-DC Dust Collector is designed for all day operation. It has a triple bank HEPA filtration that results in 40-45% more airflow through the cabinet which increases visibility and dust collection over older bag-style units. Keeps 99.97% of dust inside the dust collector and out of your shop. Plus,125% more filtering area for longer operation. The 180-DC comes standard with most of our Commercial-grade cabinets and is optional on our professional series cabinet. It is considerably more than our VAC-50 vacuum, but it is a workhorse with high star customer reviews.
Was this review helpful to you? Yes / No - You may also flag this review.

 

This dust collector works outstanding.

By Gene Verified Buyer from Enterprise, AL on 7/22/2019
Was this a gift? No
Pros: Quiet, Clean, Powerful.
Describe Yourself: Owner of the Shop
Cons: None
Best Uses: Blast Cabinet Dust Collector
Bottom Line: Yes, I would recommend this to a friend

This dust collector is outstanding. We blast anodizing from aluminum parts. Used in conjunction with the Dust Collector Final Filter Kit, we are able to maintain the cleanliness we need in our shop. I really appreciate the quietness of this unit. It was a welcome surprise.

Was this review helpful to you? Yes / No - You may also flag this review.

 

Big upgrade!

By Jim Verified Buyer from Stratford, CT on 5/14/2018
Was this a gift? No
Bottom Line: Yes, I would recommend this to a friend

Upgraded our VAC-50 on a 960 Pro cabinet and saw a big improvement. Dust collection is better and the noise level is MUCH lower. I wouldn't say the VAC-50 is a bad dust collector but this is so much better.

Service & Delivery comments: Unit arrived on time and in perfect condition.
Was this review helpful to you? Yes / No - You may also flag this review.

 

Good for professional use

By HillbillyWizard LLC Verified Buyer from Halifax, PA on 3/19/2018
Was this a gift? No
Bottom Line: Yes, I would recommend this to a friend

I bought this for use on a 5ft long blast cabinet. Can't comment yet on durability but love that it is a USA made product. Looks heavy duty. Clears the dust from my cabinet well and I'm using a turbo nozzle. I use this in a professional shop (HillbillyWizard Axle Refurbishing) and it is suitable for daily use. The exhaust air should be vented outside or use the filter bag (not included) to keep dust out of the shop. Have about 15 -20 hrs of run time on it so far and happy with the product. Sound level is not bad given the volume of air being moved.

Service & Delivery comments: Easy delivery ( but we have a forklift at the shop)
Was this review helpful to you? Yes / No - You may also flag this review.

Displaying Reviews 1-5 of 10
topTop