We have the tools you need for a successful restoration.
Questions or Help Ordering,
Call 800-321-9260
For Questions or to Place an Order,
Call 800-321-9260
For Questions or to Place an Order,
Call 800-321-9260   

POR-15® Rust Preventive Paint - Gloss Silver, Qt

POR-15
POR-15® Rust Preventive Paint - Gloss Silver, Qt
Watch Videos
To view full screen, click the play button and then click the bottom right corner of video or press the "f" key.
POR-15 Rust Preventive Coating
Item#
P-1QS
MPN#
45304
UPC#
051491453042
Our Price: $67.00
  • Buy 4 at $65.00 ea
Backorder Ground Ship Only

Stop rust permanently with POR-15®. Unlike "ordinary" paints, POR-15® is a rust preventive coating designed for application directly on rusted, seasoned or abrasive-blasted metal surfaces. POR-15® will stop rust permanently in its tracks and leave a beautiful, rock-hard, nonporous flexible finish that won't chip, crack, or peel. Made in USA.

The secret lies in the POR-15® curing process. POR-15® cures by drawing moisture from the atmosphere. Ordinary paint cures through the process of solvent evaporation through pores (that's why you can smell a paint job for weeks). These pores allow microscopic amounts of air and moisture to gradually reach the surface of the painted metal; and, if the paint goes unwaxed for very long, rust will form right back through it.

When using POR-15®, there are no pores in the drying process. Therefore, moisture and oxygen cannot reach the metal surface; and, it PREVENTS RUST FROM RECURRING by isolating the metal from further exposure to moisture. Without moisture present, steel can't rust. POR-15® is so tough that some customers describe it as "Powder Coat in a can".

Use it on: your chassis, fenders, floor boards, bumpers, trunk areas, engine areas, rocker panels, floor pans, firewalls, chassis components, wheel wells, truck beds, gas tank exteriors, springs, trailers, trucks, tractors, or anything that you want to permanently protect from rust, stone chips, or other common "paint" failures.

POR-15® Rust Preventive Paint is sensitive to UV light (sun) and must be topcoated with POR-15® Topcoats or other paints, including lacquer-based paints to prevent fading and discoloring. Topcoating is not required for areas not exposed to sunlight such as: inner fenders, floor boards, trunk areas, engine areas, rocker panels, undercoating of frames, etc. Always brush or spray on thin coats, minimum 2 coats. Lead-free.

Gloss Silver - Contains metal filler and should be used on badly rusted, pitted areas to fill small holes and add strength to the metal. It will fill in small pits or holes better than black.

Quart (covers 96 square feet).

CAUTION - Respiratory Protection is required when painting. Not included.

CAUTION - Once dry, POR-15® cannot be removed by solvent. To prevent skin from staining, wear protective clothing and avoid contact with skin. If product does contact skin, remove immediately.

Stop rust permanently with POR-15®. Unlike "ordinary" paints, POR-15® is a rust preventive coating designed for application directly on rusted, seasoned or abrasive-blasted metal surfaces. POR-15® will stop rust permanently in its tracks and leave a beautiful, rock-hard, nonporous flexible finish that won't chip, crack, or peel. Made in USA.

The secret lies in the POR-15® curing process. POR-15® cures by drawing moisture from the atmosphere. Ordinary paint cures through the process of solvent evaporation through pores (that's why you can smell a paint job for weeks). These pores allow microscopic amounts of air and moisture to gradually reach the surface of the painted metal; and, if the paint goes unwaxed for very long, rust will form right back through it.

When using POR-15®, there are no pores in the drying process. Therefore, moisture and oxygen cannot reach the metal surface; and, it PREVENTS RUST FROM RECURRING by isolating the metal from further exposure to moisture. Without moisture present, steel can't rust. POR-15® is so tough that some customers describe it as "Powder Coat in a can".

Use it on: your chassis, fenders, floor boards, bumpers, trunk areas, engine areas, rocker panels, floor pans, firewalls, chassis components, wheel wells, truck beds, gas tank exteriors, springs, trailers, trucks, tractors, or anything that you want to permanently protect from rust, stone chips, or other common "paint" failures.

POR-15® Rust Preventive Paint is sensitive to UV light (sun) and must be topcoated with POR-15® Topcoats or other paints, including lacquer-based paints to prevent fading and discoloring. Topcoating is not required for areas not exposed to sunlight such as: inner fenders, floor boards, trunk areas, engine areas, rocker panels, undercoating of frames, etc. Always brush or spray on thin coats, minimum 2 coats. Lead-free.

Gloss Silver - Contains metal filler and should be used on badly rusted, pitted areas to fill small holes and add strength to the metal. It will fill in small pits or holes better than black.

Quart (covers 96 square feet).

CAUTION - Respiratory Protection is required when painting. Not included.

CAUTION - Once dry, POR-15® cannot be removed by solvent. To prevent skin from staining, wear protective clothing and avoid contact with skin. If product does contact skin, remove immediately.

Our Technicians Suggest
POR-15® Metal Prep, Qt
Item#
P-MRQ
MPN#
40204
UPC#
051491402040
Our Price: $23.00
In-Stock Ground Ship Only
Paint Brush, 1-1/2" wide
Item#
9005-00
MPN#
9005-00
UPC#
796512000156
Our Price: $1.19
In-Stock
Gerson® Signature ProSeries Paint/Body Combo Respirator, Med
Sale $30.00
Reg. $32.95
Save 9%
In-Stock
SAS® DERMA-LITE™ Disposable Nitrile Work Gloves, Lrg
Our Price: $10.95
In-Stock
Reviews and Q&A for Item # P-1QS
topTop