We have the tools you need for a successful restoration.

VIPERCUT 30™ 30 Amp 115/230 Volt Plasma Cutter

Jasic Technologies
VIPERCUT 30™ 30 Amp 115/230 Volt Plasma Cutter
Item#
JV-3012
MPN#
VPC30LT12
UPC#
728044212103
 
(2 Ratings)
Sale $449.00
Reg. $499.00
$50.00 off
Zone Map
Zone 1 Zone 2 Zone 3
$25.00 $25.00 $25.00
In-Stock

Cuts Just About Anything For Auto Body Repair.

30 amp Plasma cuts mild steel, stainless, brass, aluminum, and other conductive materials FAST. You can make straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many other special cuts in minutes. Easy to use – just hook up to dry, oil-free compressed air (6 cfm @ 55-75 psi), touch metal, and press trigger. After metal is pierced, drag torch across surface. Torch cuts metal like butter, leaving a clean edge with little need to deburr.

VIPERCUT 30™ 30 Amp 115/230v Plasma Specs:

  • 30 amp cutting capacity up to 1/2" thick (up to 1/4" clean cut & 1/2" rough sever)
  • Dual Voltage-Sensing technology (115 or 230 volt) lets you plug into either power supply with adapter cord included
  • 20-30 amp current adjustment
  • 35% Duty Cycle @ 30 amps
  • 85% efficiency
  • Fan-cooled
  • Adjustable air filter/regulator
  • 12 ft torch cable, 10 ft ground cable
  • Low Frequency Arc start method
  • Includes 1 cutting nozzle
  • Lightweight and portable, 21 lbs
  • Ship wt 26.5 lbs
  • 6-1/2"W, 12"H, 20"D
  • 1-year warranty

Cuts Just About Anything For Auto Body Repair.

30 amp Plasma cuts mild steel, stainless, brass, aluminum, and other conductive materials FAST. You can make straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many other special cuts in minutes. Easy to use – just hook up to dry, oil-free compressed air (6 cfm @ 55-75 psi), touch metal, and press trigger. After metal is pierced, drag torch across surface. Torch cuts metal like butter, leaving a clean edge with little need to deburr.

VIPERCUT 30™ 30 Amp 115/230v Plasma Specs:

  • 30 amp cutting capacity up to 1/2" thick (up to 1/4" clean cut & 1/2" rough sever)
  • Dual Voltage-Sensing technology (115 or 230 volt) lets you plug into either power supply with adapter cord included
  • 20-30 amp current adjustment
  • 35% Duty Cycle @ 30 amps
  • 85% efficiency
  • Fan-cooled
  • Adjustable air filter/regulator
  • 12 ft torch cable, 10 ft ground cable
  • Low Frequency Arc start method
  • Includes 1 cutting nozzle
  • Lightweight and portable, 21 lbs
  • Ship wt 26.5 lbs
  • 6-1/2"W, 12"H, 20"D
  • 1-year warranty
Our Technicians Suggest
Cutting Electrode for VIPERCUT™ Plasma Cutter - 5 Pk
Item#
JV-0110
MPN#
RWPR-0110
UPC#
728044213063
 
(0 Rating)
Our Price: $23.95
In-Stock
Cutting Nozzle for VIPERCUT™ Plasma Cutter - 5 Pk
Item#
JV-0116-8
MPN#
RWPD-0116-8
UPC#
680474943876
 
(0 Rating)
Our Price: $23.95
In-Stock
Swirl Ring for VIPERCUT™ Plasma Cutter - Each
Item#
JV-0106
MPN#
RWPE-0106
UPC#
728044213056
 
(0 Rating)
Our Price: $17.95
Backorder
Retaining Cap for VIPERCUT™ Plasma Cutter - Each
Item#
JV-0116
MPN#
RWPC-0116
UPC#
728044213070
 
(0 Rating)
Our Price: $21.95
In-Stock
STEINER ProSeries™ Leather Welding Gloves
Item#
8061-88
MPN#
P760L
UPC#
690830375029
 
(0 Rating)
Sale $16.00
Reg. $17.95
Save 11%
In-Stock
Reviews for Item # JV-3012
Reviewed by 2 Customers
Displaying Reviews 1-2 of 2

 

Viper cut

By Denny Verified Buyer from Highspire pa on 2/10/2019
Was this a gift? No
Bottom Line: Yes, I would recommend this to a friend

Just only used it a few times to try it out and I love it !!! I'm just a home hobbyist and did a lot of research this one came out number one in my book for the money !!!

Was this review helpful to you? Yes / No - You may also flag this review.

 

Great product, best price,very satisfied, would buy again.

By Bull Mtn. Billy from Montana on 1/14/2019
Was this a gift? No
Pros: Quality
Describe Yourself: Professional, fabricator
Cons: none
Best Uses: Home shop, fabricating
Bottom Line: Yes, I would recommend this to a friend

First plasma cutter, well made, solid, nothing cheap. 12 ft. torch with plastic screw on end protector, 9 1/2 ft. ground lead with nice, sturdy clamp, heavy 6 1/2 ft. power cord with 110 adapter. Built in air filter with pressure gauge, all you need is male air fitting & your ready to go. Also got extra consumables. Cut 1/8", 1/4",3/8" no problem & severed 1/2". Definite advantage for variety of cutting applications & fabricating. Had a question & e-mailed Razorweld & received prompt ,clear response. Would definitely recommend the Razorweld Vipercut 30i to anyone looking for a plasma cutter.

Was this review helpful to you? Yes / No - You may also flag this review.

Displaying Reviews 1-2 of 2
topTop