We have the tools you need for a successful restoration.

Economy Magna-Spot® Stud Gun Weld Kit

Motor Guard
Economy Magna-Spot® Stud Gun Weld Kit
Item#
8038-15
MPN#
509
UPC#
601965005095
 
(0 Rating)
Sale $159.00
Reg. $219.00
$60.00 off
Zone Map
Zone 1 Zone 2 Zone 3
$20.00 $20.00 $20.00
In-Stock

For ultimate dent removal, moulding rivet installation, and shrinking/expanding metal!

Remove dents professionally in hoods, fenders, deck lids, or any other sheet metal panel on your car, truck, or tractor. Simply plug Magna-Spot® into 115 volt 15 amp outlet, insert draw pin into stud gun, hold against clean metal surface, and press trigger 1/2 to 1 second. Instantly, Magna-Spot® welds draw pin to metal surface where it can be pulled out using slide hammer supplied in kit. Once dent is pulled, grind off draw pins flush with metal surface, and finish with body filler. For large dents, several pins can be welded in a series as shown.

Moulding trim rivets for holding aluminum, stainless, or plastic trim clips can also be welded using the optional rivet electrode and rivets (sold separately). Insert trim rivet into stud gun, place against clean metal surface until outer ring is seated, press trigger for 1/2 to 1 second, and rivet will now be welded to metal. After painting, plastic or metal trim clips will slide over rivets and hold your trim in place.

Shrink high spots and expand small dents by using the optional shrink/expand electrode. Place Magna-Spot® Gun against clean metal surface until outer ring is seated, press trigger for 1/2 second, two or three times to heat metal. Generally, small high spots will disappear. If high spot does not shrink, tap lightly with body hammer. If a dent does not expand, apply a damp cloth to the heated metal to raise the surface.

Includes Magna-Spot® 1000 Gun, slide hammer for pulling dents, one draw pin electrode and (100) 2.0mm draw pins. Ship wt: 17 lbs. 10" long, 9" high, 4-1/4" wide. Made in USA.

For ultimate dent removal, moulding rivet installation, and shrinking/expanding metal!

Remove dents professionally in hoods, fenders, deck lids, or any other sheet metal panel on your car, truck, or tractor. Simply plug Magna-Spot® into 115 volt 15 amp outlet, insert draw pin into stud gun, hold against clean metal surface, and press trigger 1/2 to 1 second. Instantly, Magna-Spot® welds draw pin to metal surface where it can be pulled out using slide hammer supplied in kit. Once dent is pulled, grind off draw pins flush with metal surface, and finish with body filler. For large dents, several pins can be welded in a series as shown.

Moulding trim rivets for holding aluminum, stainless, or plastic trim clips can also be welded using the optional rivet electrode and rivets (sold separately). Insert trim rivet into stud gun, place against clean metal surface until outer ring is seated, press trigger for 1/2 to 1 second, and rivet will now be welded to metal. After painting, plastic or metal trim clips will slide over rivets and hold your trim in place.

Shrink high spots and expand small dents by using the optional shrink/expand electrode. Place Magna-Spot® Gun against clean metal surface until outer ring is seated, press trigger for 1/2 second, two or three times to heat metal. Generally, small high spots will disappear. If high spot does not shrink, tap lightly with body hammer. If a dent does not expand, apply a damp cloth to the heated metal to raise the surface.

Includes Magna-Spot® 1000 Gun, slide hammer for pulling dents, one draw pin electrode and (100) 2.0mm draw pins. Ship wt: 17 lbs. 10" long, 9" high, 4-1/4" wide. Made in USA.

Our Technicians Suggest
Trim Rivet Electrode Tip
Item#
8038-26
MPN#
535
UPC#
601965005354
 
(0 Rating)
Our Price: $29.95
In-Stock
Shrinking/Expanding Electrode Tip
Item#
8038-27
MPN#
525
UPC#
601965005255
 
(0 Rating)
Our Price: $17.95
In-Stock
Trim Rivets (bag of 500)
Item#
8038-29
MPN#
540
UPC#
601965005408
 
(0 Rating)
Our Price: $27.95
In-Stock
Shoot Suit® Stud Puller
Item#
8038-34
MPN#
SHO-5800
UPC#
728044193679
 
(0 Rating)
Our Price: $36.95
In-Stock
Full-Face Grinding & Cutting Shield
Item#
ATD-3746
MPN#
3746
UPC#
663126037468
 
(1 Rating)
Our Price: $17.95
In-Stock
Reviews for Item # 8038-15
Be the first to review this product. Write a Review
topTop