We have the tools you need for a successful restoration.

Deluxe Magna-Spot® Stud Gun Weld Kit

Motor Guard
Deluxe Magna-Spot® Stud Gun Weld Kit
Item#
8038-20
MPN#
505
UPC#
601965005057
 
(0 Rating)
Our Price: $329.00
Zone Map
Zone 1 Zone 2 Zone 3
$20.00 $20.00 $20.00
In-Stock

Professionally remove dents in hoods, fenders, deck lids, or any other sheet metal panel on your car, truck, or tractor. Simply plug Magna-Spot® into 115 volt 15 amp outlet, insert draw pin into stud gun, hold against clean metal surface, and press trigger for 1/2 to 1 second. Instantly, Magna-Spot® welds draw pin to metal surface where it can be pulled out using slide hammer supplied in kit. Once dent is pulled, grind off draw pin flush with metal surface, and finish with body filler. For large dents, several pins can be welded in a series.

Moulding trim rivets for holding aluminum, stainless, or plastic trim clips can also be welded using the rivet electrode and rivets (included). Insert trim rivet into stud gun, place against clean metal surface until outer ring is seated, press trigger for 1/2 to 1 second; and rivet will now be welded to metal. After painting, plastic or metal trim clips will slide over rivets and hold your trim in place.

Shrink high spots and expand small dents by using the shrink/expand electrode (included). Place Magna-Spot® Gun against clean metal surface until outer ring is seated, press trigger for 1/2 second, two or three times to heat metal. Generally, small high spots will disappear. If high spot does not shrink, tap lightly with body hammer. If a dent does not expand, apply a damp cloth to the heated metal to raise the surface.

Includes Magna-Spot® 1500 Gun, heavy-duty slide hammer, moulded carrying case, draw pin electrode tip, trim rivet electrode tip, shrinking/expanding electrode tip, (500) 2.0mm draw pins, and 150 rivets. Ship wt: 20 lbs. 10-3/4" long, 9" high, 4-1/4" wide. Made in USA.

Professionally remove dents in hoods, fenders, deck lids, or any other sheet metal panel on your car, truck, or tractor. Simply plug Magna-Spot® into 115 volt 15 amp outlet, insert draw pin into stud gun, hold against clean metal surface, and press trigger for 1/2 to 1 second. Instantly, Magna-Spot® welds draw pin to metal surface where it can be pulled out using slide hammer supplied in kit. Once dent is pulled, grind off draw pin flush with metal surface, and finish with body filler. For large dents, several pins can be welded in a series.

Moulding trim rivets for holding aluminum, stainless, or plastic trim clips can also be welded using the rivet electrode and rivets (included). Insert trim rivet into stud gun, place against clean metal surface until outer ring is seated, press trigger for 1/2 to 1 second; and rivet will now be welded to metal. After painting, plastic or metal trim clips will slide over rivets and hold your trim in place.

Shrink high spots and expand small dents by using the shrink/expand electrode (included). Place Magna-Spot® Gun against clean metal surface until outer ring is seated, press trigger for 1/2 second, two or three times to heat metal. Generally, small high spots will disappear. If high spot does not shrink, tap lightly with body hammer. If a dent does not expand, apply a damp cloth to the heated metal to raise the surface.

Includes Magna-Spot® 1500 Gun, heavy-duty slide hammer, moulded carrying case, draw pin electrode tip, trim rivet electrode tip, shrinking/expanding electrode tip, (500) 2.0mm draw pins, and 150 rivets. Ship wt: 20 lbs. 10-3/4" long, 9" high, 4-1/4" wide. Made in USA.

Our Technicians Suggest
Shoot Suit® Stud Puller
Item#
8038-34
MPN#
SHO-5800
UPC#
728044193679
 
(0 Rating)
Our Price: $37.95
In-Stock
STEINER ProSeries™ Leather Welding Gloves
Item#
8061-88
MPN#
P760L
UPC#
690830375029
 
(0 Rating)
Sale $14.95
Reg. $17.95
Save 17%
In-Stock
Full-Face Grinding & Cutting Shield
Item#
ATD-3746
MPN#
3746
UPC#
663126037468
 
(1 Rating)
Our Price: $17.95
In-Stock
Reviews for Item # 8038-20
Be the first to review this product. Write a Review
topTop