We have the tools you need for a successful restoration.

DeVILBISS® GFG-670 Plus Non-HVLP Finish Spray Gun

DeVILBISS
DeVILBISS® GFG-670 Plus Non-HVLP Finish Spray Gun
Item#
ME-670
MPN#
GFG670
UPC#
658701017638
 
(2 Ratings)
Sale $399.00
Reg. $439.00
$40.00 off
In-Stock

Reduced-Pressure Spray Gun with Breakthrough-Plus Technology.

Provides super atomization, creating glass-like finishes while still reducing overspray. This non-HVLP gun has a higher air cap pressure than HVLP guns while still producing the same material transfer rate of 65%. This gun will perform much like a conventional spray gun but without the overspray and material consumption. Reduced-pressure guns are most popular for those demanding a superfine finish with increased paint savings.

Gun includes: 3 nozzles (1.2 mm, 1.3 mm, and 1.4 mm), 1-liter cup, and an air-adjusting valve with gauge. For those with a smaller air compressor, this gun is a great choice because of its low cfm requirements. Requires air compressor hookup of 9 cfm @ 30 psi.

4-1/2" wide, 13" high, 7-1/2" deep. Made in USA.

Low overspray - Save up to 50% on materials.

WARNING - A respirator is required for use with this equipment (not included). See your safety supplier for proper protection.

Reduced-Pressure Spray Gun with Breakthrough-Plus Technology.

Provides super atomization, creating glass-like finishes while still reducing overspray. This non-HVLP gun has a higher air cap pressure than HVLP guns while still producing the same material transfer rate of 65%. This gun will perform much like a conventional spray gun but without the overspray and material consumption. Reduced-pressure guns are most popular for those demanding a superfine finish with increased paint savings.

Gun includes: 3 nozzles (1.2 mm, 1.3 mm, and 1.4 mm), 1-liter cup, and an air-adjusting valve with gauge. For those with a smaller air compressor, this gun is a great choice because of its low cfm requirements. Requires air compressor hookup of 9 cfm @ 30 psi.

4-1/2" wide, 13" high, 7-1/2" deep. Made in USA.

Low overspray - Save up to 50% on materials.

WARNING - A respirator is required for use with this equipment (not included). See your safety supplier for proper protection.

Reviews for Item # ME-670
Reviewed by 2 Customers
Displaying Reviews 1-2 of 2

 

II buy it again

By Ito Verified Buyer from Vineland NJ on 6/11/2017
Pros: Easy To Clean, Even Paint Distribution
Describe Yourself: Professional
Best Uses: Detailed Work, Large Areas, Small Areas
Bottom Line: Yes, I would recommend this to a friend

For clear is perfect

Service & Delivery comments: Fast delivery
Was this review helpful to you? Yes / No - You may also flag this review.

 

great gun hope to have it in use for many years

By busted knuckle garage Verified Buyer from central mass on 4/2/2017
Pros: Easy To Clean, layed out uretane base and clear perfect
Describe Yourself: Avid Do-It-Yourselfer
Cons: no cons, None
Best Uses: i mostly paint tanks and fenders
Bottom Line: Yes, I would recommend this to a friend

Just a great gun for the price ...going to get the es liner or de kupp set up to help with cleanup

Service & Delivery comments: Tl was great. Best price and quick deliverywill be ordering all my shop products through them (sandpaper. Blocks and a new primer gun soon)
Was this review helpful to you? Yes / No - You may also flag this review.

Displaying Reviews 1-2 of 2
topTop