|
|
3/4 HP Baldor Buffer and Enclosed Stand Packages
|
$578.00 - $777.00 SALE Prices Below!
TP Tools offers this buffer in these affordable packages:
- 3/4 HP bench mount Baldor buffer and 14 gauge steel cabinet stand.
- 3/4 HP Baldor buffer, cabinet stand and buffing kit. Each is described below.
- 3/4 HP, 2-Speed bench mount Baldor buffer and 14 gauge steel cabinet stand.
- 3/4 HP, 2-Speed Baldor buffer, cabinet stand and buffing kit. Each is described below.
Trophy-winning results at an affordable price. 3/4 HP buffer has 3600 rpm, 1-phase motor to resist stalling and provide added horsepower for hours of use. 8 ft cord (115 volt/4.8 amps) plugs into 115 volt common house-hold circuit. Uses 8'' diameter buffing wheels x 3/4'' arbor hole. 29'' shaft length provides plenty of room for buffing large, odd-shaped pieces (6-5/8'' from end of shaft to housing). 3 year warranty against burnout. (Also available with 1800/3600 rpm, 2-speed motor. 1800 rpm for plastics and 3600 rpm for metals and nonferrous materials. A TRUE 2-speed buffer.) Made in USA.
Mount buffer to 14 gauge steel cabinet stand for a sturdy stand-alone unit. Enclosed cabinet does more than just support buffer - it holds your buffing supplies as well! Full-size 22 gauge front-opening door makes loading and unloading supplies easy. Plus, dual-latch locking system with sealing gasket keeps buffing dust and dirt out of cabinet and off buffing supplies --- an exclusive design available only through TP Tools. 31" high, 16" wide, 16-1/2" deep. 55 lbs. 11 gauge top mounting plate. Door opening: 10-1/2" wide, 28-1/2" high. 14" height above and below shelf. Made in USA.
Buffing kit completes the finishing operation with everything you need: six different buffing compounds, buffing rake to keep buffing wheels clean, and six 1/2'' thick buffing wheels (2 sisal for fastest cutting, 2 spiral for removal of most scratches and 2 loose for final high gloss finishing). Kit is designed to fit 3/4 HP motor, 3/4'' shaft. Made in USA.
Face, eye and respiratory protection required when bufifng.
|
|
|
|
|
|
|
|
|
|
Heavy, oversize, motor freight, or other items requiring extra shipping/packaging have a "Zone Adder".
|
 |
Adders for Zone 1, 2, and 3 (if any) are shown above.
See
Shipping/Export for more information and to
determine your delivery zone.
(Direct lines only - no interlines)
This amount will be added to your total automatically.
|
|