|
|
3/4 HP BALDOR® Buffer and Packages
|
|
|
$529.00 - $919.00
TP Tools offers buffers in three affordable ways: - 3/4 HP bench mount BALDOR® buffer.
- BALDOR® buffer and 11 gauge steel stand or cast iron BALDOR® stand.
- BALDOR® buffer, stand and buffing kit. Each is described below.
Trophy-winning results at an affordable price. 3/4 HP buffer has 3600 rpm, 1-phase motor to resist stalling and provide added horsepower for hours of use. (Also available with 1800/3600 rpm, 2-speed motor. 1800 rpm for plastics and 3600 rpm for metals and nonferrous materials. A TRUE 2-speed buffer.)
8 ft cord (115 volt/4.8 amps) plugs into 115 volt common house-hold circuit. Uses 8'' diameter buffing wheels x 3/4'' arbor hole. 29'' shaft length provides plenty of room for buffing large, odd-shaped pieces (6-5/8'' from end of shaft to housing). 3 year warranty against burnout. Made in USA.
11 Gauge Steel Stand - Mount buffer to 11 gauge steel stand for a sturdy stand-alone unit. Heavy-duty steel stand is 30-1/2" high with 18'' wide x 15-3/4'' base.
BALDOR® Cast Iron Stand 33'' high with 15-3/4'' wide X 14'' deep base. Made in USA.
SAVE when you buy Buffer, Stand and Buffing Kit!
Buffing Kit includes: six different buffing compounds, buffing rake to keep buffing wheels clean, and six 1/2'' thick buffing wheels (2 sisal for fastest cutting, 2 spiral for removal of most scratches and 2 loose for final high gloss finishing). Kit is designed to fit 3/4 HP motor, 3/4'' shaft. Made in USA.
Face, eye and respiratory protection required when buffing.
|
|
|
|
|
|
|
|
|
|
Heavy, oversize, motor freight, or other items requiring extra shipping/packaging have a "Zone Adder".
|
 |
Adders for Zone 1, 2, and 3 (if any) are shown above.
See
Shipping/Export for more information and to
determine your delivery zone.
(Direct lines only - no interlines)
This amount will be added to your total automatically.
|
|