High-quality USA desiccant dryer system will remove water, dirt, oil, and water vapor from your air.
If you are a serious restorer or body shop owner, you require super dry air to ensure trouble-free spray painting. This Paint Booth Desiccant Dryer offers the best value for your money. This 2-stage filter provides low-humidity air. It will keep your air dry providing you the flawless finishes you demand. The unit features an activated carbon element with an automatic drain valve in the 1st stage to remove all water, dirt, oil, and oil-aerosols to 0.003 ppm. The 2nd stage has a long-lasting desiccant cartridge to lower humidity to -40ºF. Both filters have a tool-less spin-on-spin-off filter design for quick, easy cartridge replacements. The Eliminator®II is also a great choice for new Waterborne products. By eliminating oil and oil mist, this unit will give you consistent flash and dry time with waterborne finishes. Has 1/2" inlet and regulator with 3/8" NPT outlet. Max flow 25 cfm. Max air pressure 150 psi.
17-1/2" wide, 20" high, 5" deep. 12.5 lbs. Made in USA.
TP Tools Tip: For best results, place water filters as far away from the compressor as possible (at least 25 ft). This allows the air to cool and condense so water can be removed efficiently.