For use with any Skat Blast Vacuum System. Collects 30-40% of reusable abrasive, and extends vac bag/filter and motor life!
Skat Blast Vacuum Abrasive Reclaimer mounts in-line between your abrasive blast cabinet and vacuum. During use, reclaimer instantly starts collecting and separating sharp, reusable abrasive. Broken-down, powderized abrasive travels through reclaimer and into vacuum where it is collected and can later be disposed of. Sharp, reclaimed abrasive stays in reclaimer and can be drained into a bucket and poured back into your cabinet for reuse. Results are a 30-40% abrasive savings, longer vacuum life, less emptying of vacuum, and extended bag/filter and motor life. Try one on your cabinet today and see how quickly it pays for itself!
9-1/2"w, 8"d, 22"h. Made in USA.
Fits model 780, 780-TL (requires closing latch on 780-TL lid to be relocated), 850, 850-T, 930, 935, 950, 951, 952, 960, 960-T, 960-SE & 970 cabinets. To install, remove existing vacuum ferrule and fasten reclaimer to side of cabinet (mounting hardware included). Then connect Vac-34, 35, 36, 40, or 45 inlet hose.
A must when using expensive abrasives such as Aluminum Oxide and Silicon Carbide!