The best possible paint finish starts with a Sharpe Dryaire™ Desiccant Filter System -- known as the "painter's best friend" for dirt, water, oil and uncondensed moisture removal from your air lines. Made in USA.
The Sharpe Advantage
- Desiccant bead material provides maximum absorption and changes color when saturated
- Built-in sight glass allows constant monitoring of desiccant beads
- Automatic drains on Stage 1 and Stage 2 Filters
- 30 cfm, 3-stage filter system provides the driest air possible
- Approved for paint company warranty programs
A flawless paint finish starts with this filter system!
SHARPE Dryaire™ System uses four stages to provide dry, moisture- and oil-free air to your paint gun. As air enters Stage 1 - Filter, water and contaminates down to 5 microns are collected. As air enters Stage 2 - Coalescing Filter oil and sub-micronic particles down to .01 micron are removed. Stage 3 is the Desiccant Filter, where any uncondensed moisture is absorbed by the desiccant material resulting in completely dry air! Dry air then enters Stage 4 - Air Regulator where pressure can be adjusted to your paint gun.
When it comes to removing dirt, water and oil from your air lines, this system is a painter's best friend!
SPECIFICATIONS:
Stage 1 Filter - 1/2" inlet/outlet, 108 cfm, 175 psi max, 5 micron
Stage 2 Filter - 1/2" inlet/outlet, 35 cfm, 175 psi max, .01 micron
Stage 3 Filter - 3/4" inlet/outlet, 30 cfm, 175 psi max, desiccant
Air Regulator - 3/8" inlet, 1/4" outlet (3), 100 cfm, 160 psi max
Includes 5 lb can of desiccant beads and filter system, with mounting bracket. 1/2" FPT inlet and 3/8" FPT outlet. 22" wide, 23" high, 6" deep.
TP Tools Tip: For best results, place water filters as far away from the compressor as possible (at least 25 ft). This allows the air to cool and condense so water can be removed efficiently.