All models continually recycle abrasive for fast rust and paint
removal anytime. Air hose, included with some models, connects
to siphon power gun. |
Models 950 and up have a foot pedal control. Your air compressor
hose enters one side. 7ft. hose, included with some models, connects
on opposite side and leads to cabinet power gun. |
Any abrasive can be used, provided it is dry. Most models include
a supply of abrasive to get you started.
|
Place rusty part in cabinet. Reinforced metal screen holds objects
up to 200lbs. |
Floodlight, located in cab, provides light on the object. 85
cfm, 115 volt vacuum pulls dust from work area. One switch operates
both. (Optional some models.) |
Place hands in cabinet gloves. These gloves are rubber gauntlet
type, abrasive-resistant and reach to all areas of the cabinet.
Gloves are easily replaced. |
No-skip, no surge recycling system. Simply aim power gun, press
foot pedal (or pull trigger), and watch rust disappear. Abrasive
drops to bottom where it recycles. |
After vacuum has cleared the work area, open the side door to
check results. Above area took only minutes to clean using Skat
Magic abrasive at 60-80 psi. |