Details
RUST STOPS HERE!
KBS Coatings 3-STEP SYSTEM of RustSeal (a rust-preventive coating), AquaKlean (an industrial-strength, water-based cleaner/degreaser) and RustBlast (a powerful rust remover/metal etch) is the most technologically advanced metal protection system in the world today!
Step 1 - AquaKlean
A water-based, concentrated, biodegradeable cleaner/degreaser. Use first to clean and degrease parts prior to applying RustBlast Pre-Paint Primer. Dilute with water 1:1 or 1:5. Made in USA. Available in quart or gallon.
Step 2 - RustBlast
A water-based rust remover and zinc phosphate pre-primer metal etch. Use after Aqua Klean to prepare the surface for RustSeal Paint Coatings below. Ensures strong bond. Made in USA. Available in quart or gallon.
Step 3 - RustSeal Rust Preventive Paint Coating
RustSeal is a ready-to-use, single-component, high-solids content, moisture-curing urethane with exceptional sealing properties. RustSeal stops rust and locks out moisture permanently. Ready-to-use formula applies directly over treated rust or corrosion. Simply brush, roll, or spray on. It won't crack, chip, flake, or peel, plus remains flexible allowing expansion and contraction. RustSeal also withstands temperatures up to 600°F, repels fuels, oils, and most acids, and is mold- and mildew-resistant. Adheres to steel, aluminum, fiberglass, concrete, wood, and some plastics. If the surface is exposed to sunlight, topcoating is recommended. Topcoat can be done with any material within 12 hours. After 12 hours, scuff the surface with 320 grit sandpaper; then apply topcoat. Unlike other rust preventive paints, RustSeal is available in 10 paint colors - see paint chips above. Made in USA. 1 qt.
Galvanized Steel RustSeal - #KBS-4415 - Duplicates the look of a galvanized matte finish and provides the same protection as RustSeal Paint above. 3 products in 1 - a permanent rust coating, a high-build primer, and a UV-enhanced topcoat. Made in USA. 1 qt.
CAUTION - Respiratory Protection is required when painting. Not included.
CAUTION - Once dry, KBS cannot be removed by solvent. To prevent skin from staining, wear protective clothing and avoid contact with skin. If product does contact skin, remove immediately.